Polaris 2013 ATV Sportsman 500 Tractor INTL - Manual (Page 23)

21
FEATURES AND CONTROLS
Switches
Main Key Switch
End all electrical power to the vehicle.
The LIGHTS ON position turns the headlights
on. The master light switch must be on and the
engine stop switch must be in the RUN position.
Start the engine. The headlights are not on in
this position.
After starting the engine, release the key switch to the PARKING
LIGHTS ON position. The parking lights and taillights are on in
this position.
Do not attach a large key fob or key ring to the main switch. It may contact the
gas tank cap when turning, causing an interruption to the electrical system and
an unexpected engine shut-down during operation. This could result in serious
injury or death.
Engine Stop Switch
The engine will not start or run when the
switch is in the OFF position.
OFF (STOP)
RUN
Light Switch (High/Low Beam)
Use the light switch to change the head-
lights from high beam to low beam. The
master light switch must be on to operate
the headlights.
High Beam
Low Beam
Override
Switch
Engine
Stop
Switch
Light
Switch
Horn
Switch
Hazard
Switch
Turn
Signal
Switch