Polaris 2013 ATV Sportsman 500 Tractor INTL - Manual (Page 22)

20
FEATURES AND CONTROLS
Switches
Master Light Switch
The master light switch must be in the ON position to allow operation of
the headlights, parking lights and taillights.
Momentary High Beam Switch
Press this switch with your left forefinger to activate the headlight high
beam. The lights will return to low beam when the switch is released.
Winch Switch
See page 62 for winch information.
Mode/Reverse Override Switch
Press the switch to toggle through the speedometer display modes
(except in reverse). See page 33. To gain additional power while operat-
ing in reverse, press the override switch before opening the throttle. This
will cancel the reverse speed limit function.
The reverse override switch also acts as a MODE switch when held
down for approximately one half second. See the instrument cluster
information beginning on page 33.
Tip: The override switch will not function as a MODE switch if the transmission
is in reverse.
Activating the override switch while the throttle is open can cause loss of control.
Do not activate the override switch while the throttle is open.
Mode/Reverse
Override Switch
Main Key
Switch
4X4 Switch
Winch Switch
Momentary High-Beam
Switch
Work Light
Switch
Master Light
Switch