Polaris 2013 ATV Sportsman 500 Tractor INTL - Manual (Page 31)

29
FEATURES AND CONTROLS
Hitches
Hitch Installation/Removal
1. Release the wire lock from the 12.7 mm pin and remove the pin.
2. Install the hitch to the receiver.
3. Install the 12.7 mm pin through the bore of both the receiver and the
hitch. Secure the wire lock. Make sure the hitch assembly is secure
at that the wire lock is properly engaged over the pin.
4. To remove the hitch, release the wire lock, remove the hitch, rein-
stall the pin to the receiver and secure the wire lock.
Step 2 Step 1 Step 3