Polaris 2016 600 Rush PRO-S - Manual (Page 40)

38
FEATURES
Engine Overheat Indicators
Over-Temperature Indicator (Standard Cluster)
The over-temperature indicator
on the standard instrument
cluster will illuminate when the
engine is overheating. Take
action to cool the engine. See
page 39.
The indicator will flash when
engine temperature reaches
critical levels. Stop the engine
immediately.
Overheat Warning (IDD)
The engine temperature scale at
the right side of the IDD screen
changes to RED and the check
engine temperature indicator at
the top left of the screen
illuminates when the engine is
overheating. Take action to
cool the engine. See page 39.
The indicator will flash when
engine temperature reaches critical levels. Stop the engine immediately.
Please see your IDD Owner’s Manual for more information.
Flashing Indicator
Flashing indicators indicate continued operation could result in serious
engine damage. The engine management system will automatically
reduce engine power and create a misfire condition. Stop the engine
immediately. Allow the engine to cool down.
NOTE: If engine overheating seems to be caused by something other than
poor cooling conditions, see your dealer for service.
600/800 HO Models Engine Temperature Protection Modes
Hot Lamp Threshold*
ON Lamp illuminates: Idle = 201° F (94° C), WOT = 185° F (85° C)
FLASHING Lamp Flashes, Engine Turns Off: Idle = 215.6° F (102° C),
WOT = 201° F (94° C)
* Only the minimum (idle) and maximum (WOT) parameters are listed.