Maintenance, Air filter – Polaris 2016 RZR 900 User Manual

Page 110

Advertising
background image

108

MAINTENANCE

Air Filter

Always change the air filter at the
intervals outlined in the Periodic
Maintenance Chart beginning on
page 81.

1. Remove the cargo box access

panel.

2. Clean all dirt and debris from

the air box area.

3. Unlatch the two (2) air box

cover straps and carefully
remove the air box cover.

4. Inspect the air filter and air box

for dirt, debris or water.

5. To remove the filter, slide the

filter toward the passenger's side
of the vehicle.

6. With the filter removed, clean

the intake tube and air box
thoroughly. Wipe well with a
clean, dry cloth.

NOTICE: Dirt or debris in the intake tube could result in severe engine

damage. Always clean all dirt and debris from the intake tube before
installing the filter.

7. Reinstall the air filter (if clean) or install a new air filter (if soiled).

Do not attempt to clean the air filter.

NOTICE: Use of a non-POLARIS-approved air filter may cause engine

damage. Always use a POLARIS-approved replacement filter.
Please see your POLARIS dealer.

8. Make sure that there are no gaps between the filter and the driver’s

side of the air box.

9. Reinstall the air box cover. Make sure the tabs are properly

positioned into the hinge.

10. Secure the two (2) cover straps.

11. Reinstall the cargo box access panel.

Air Filter

Cover Straps

Advertising