Maintenance, Tires – Polaris 2016 RZR 900 User Manual
Page 120
118
MAINTENANCE
Tires
Wheel Removal
1. Position the vehicle on a level surface.
2. Place the transmission in PARK. Stop the engine.
3. Loosen the wheel nuts slightly.
4. Elevate the side of the vehicle by placing a suitable stand under the
frame.
5. Remove the wheel lug nuts. Remove the wheel.
Wheel Installation
1. Place the transmission
in PARK.
2. Place the wheel in the
correct position on the
wheel hub. Be sure the
valve stem is toward the
outside and rotation
arrows on the tire point
toward forward
rotation.
WARNING! Improperly
installed wheels can adversely
affect tire wear and vehicle
handling, which can result in
serious injury or death. Always
ensure that all nuts are torqued
to specification. Do not service
axle nuts that have a cotter pin
installed. Your POLARIS dealer
can assist.
3. Attach the wheel nuts
and washers and finger
tighten.
4. Carefully lower the vehicle to the ground.
5. Torque the wheel nuts to specification. See page 117.
Valve Stem
Right Rear Wheel
(type varies by model)