Maintenance, Cleaning and storage, Transporting the vehicle – Polaris 2016 RZR 900 User Manual

Page 133

Advertising
background image

131

MAINTENANCE

Cleaning and Storage

Removal from Storage

1. Charge the battery if necessary.

2. Make sure the spark plug is tight.

3. Fill the fuel tank with fuel.

4. Check all the points listed in the Daily Pre-Ride Inspection section

on page 51. Tightness of the bolts, nuts and other fasteners should
be checked by an authorized POLARIS dealer or other qualified
service facility.

5. Lubricate at the intervals outlined in the Periodic Maintenance

Chart beginning on page 81.

WARNING! Engine exhaust contains poisonous carbon monoxide and can
cause loss of consciousness or death. Never run an engine in an enclosed area.

Transporting the Vehicle

Follow these procedures when transporting the vehicle.

1. Place the transmission in PARK. Stop the engine.

2. Slowly release the brake pedal and make sure the transmission is in

PARK before exiting the vehicle.

3. Remove the key to prevent loss during transporting.

4. Secure the hood, doors, access panels, fuel cap and seats. Ensure

that the seats are attached correctly and are not loose.

WARNING! Cargo and other loose vehicle parts may fly off while transporting
this vehicle. Secure or remove all cargo, and inspect the unit for loose parts prior
to transport.

5. Always tie the frame of the POLARIS vehicle to the transporting

unit securely with suitable straps or rope. Do not attach tie straps to
the front control arm bolt pockets.

2 Front Tie-Down Points

2 Rear Tie-Down Points

Advertising