Elite VRVD640G - Manual (Page 4)

4
Warnings
• For safety reasons, certain video functions are disabled unless the
parking brake is on. The Unit is designed with circuitry to detect the
parked status of the vehicle, and must be connected to the power
supply side of the parking brake switch. Improper connection or
use of this connection may violate applicable law and may result in
serious injury or damage.
• To avoid any risk of damage to the vehicle or injury its occupants
and the potential violation of applicable laws, this unit is not for use
with a video screen that is visible to the driver.
• Disconnect negative battery terminal before starting installation.
Failure to disconnect the negative battery cable may cause damage
to the unit or the vehicle’s electrical system. Consult the vehicle’s
owner’s manual for proper instruction.
• Before fi nal installation of the unit, temporarily connect the wiring,
to make sure the unit works properly.
• Use only the parts included with this unit to ensure proper installa-
tion. The use of unauthorized parts may cause damage to the vehicle
or unit.
• If installation requires the drilling of holes or other modifi cations to
the vehicle, consult with your vehicle’s nearest dealership.
• Install the unit in a location where it shall not obstruct driver’s abil-
ity to safely operate the vehicle, and cannot injure any passengers if
there is a sudden stop, like an emergency stop.
• The laser will be damaged if it overheats, do not install the unit
where it will be exposed to excessive heat -- for instance, near a
heater outlet.
• For optimum performance, do not install more than 30 degrees
from horizontal.