Elite VRVD640G - Manual (Page 50)

50
mm.mmm); or degrees, minutes and sec-
onds (dd mm ss.s).
NOTE: the coordinate display mode is in-
dependent from the coordinate input in
Find menu. You can use all three formats
freely on the coordinate input screen.
Cockpit Screen Layout
Their content is fi xed in Cruise mode (when
there is no active route), but for Naviga-
tion mode you can change their content on
this screen. The available values are listed
here:
BACKLIGHT SETTINGS
Here you can set how the display backlight
behaves when using Cydle. These settings
are independent of the settings of the other
applications.
Backlight Always On
You can choose to have the lights always
on.
Brightness
You can set the backlight level separately
for both daylight and night modes, thus
enhancing the effect of the night color
scheme. The values are between 0 and 10,
where zero means there is no backlight at
all, and 10 represents the maximum back-
light value.
SMART ZOOM SETTINGS
You can set how close Smart Zoom can
zoom in when approaching the next turn
(Zoom-in limit), and the maximum zoom
level to zoom out when the next turn is fur-
ther away (Zoom-out limit). The default val-
ues are set to be optimal in most cases.
Enable Overview Mode
You can confi gure how the Overview mode
is triggered when the next turn is at a dis-
tance.
The Route event distance will determine
when Cydle switches to the Overview or
back to the Navigation view.
The Overview zoom level will determine
the fi xed zoom level of the map in both au-
tomatic and manually selected Overview
modes. You can change the zoom level
manually at any time (the Lock button will
not be displayed), but when you enter the
Overview mode again, the zoom level will
be reset to this value.
You can also move the map in Overview
mode. Then the Lock button will appear,
and when pushed, it will move the map to
have your current position in the middle
again.
NOTE: when this automatic feature is dis-
abled, you can still enable the Overview
mode manually as described here.
Restore Lock-to-position And Smart Zoom
As described at the hardware buttons and
the map screen functions, you can move,
rotate, tilt and zoom the map during navi-
gation. In these cases a Lock icon appears
on the screen.
Navigation System