Elite VRVD640G - Manual (Page 8)

8
Installation
Remove the
half sleeve
A E
IMPORTANT!
BEFORE THE FINAL INSTALLATION OF THE HEAD UNIT, CONNECT THE WIRING
TEMPORARILY, MAKING SURE THE UNIT AND THE SYSTEM WORK PROPERLY.
DIN FRONT-MOUNT (Method A)
Fig. 2
Follow the diagram in Fig. 3
for installing the rear mounting
strap to the head unit. The rear
mounting strap will help keep
the head unit from moving
around inside the dashboard.
Insert fi ngers into the groove in the front
of frame to remove it.
Insert the keys supplied with the old unit
into the grooves on both sides of the old
unit. The unit can be installed or removed
from the dashboard using these keys.
(Fig. 1)
1. Dashboard
2. Nut (5mm)
3. Spring washer
4. Screw (5 x 25mm)
5. Screw
6. Strap
7. Plain washer
Fig. 3
Fig. 1
After inserting the Mounting Sleeve into the
dashboard, select tabs on top, bottom,
and sides, then bend them to secure the
mounting sleeve in the dash board.(Fig. 2)