HEIDENHAIN iTNC 530 (340 49x-02) Pilot - Manual (Page 135)

135
Gener
a
ti
ng C
ont
ou
r Pr
og
rams
from DXF Data (Software
Starting the DXF converter from a form
8 Select the smarT.NC operating mode
8 Select any machining step for which contour programs are
required (Unit 122, Unit 125).
8 Select the input field in which the name of the contour
program is to be defined.
8 To start the DXF converter: Press the SHOW DXF soft
key. smarT.NC opens a pop-up window with available DXF
files. Select one of the displayed DXF files and confirm your
selection with the ENT key or the OK button. The TNC starts
the DXF converter, with which you select the desired
contour and can save the contour names directly in the form
(see ”Generating Contour Programs from DXF Data
(Software Option)” on page 133).