HEIDENHAIN iTNC 530 (340 49x-02) Pilot - Manual (Page 5)

5
Fu
nd
ame
n
ta
ls
Fundamentals
Introduction to smarT.NC
With smarT.NC you can easily write structured conversational programs
in separate working steps (units) and, if you want, edit them with the
conversational editor. Since the only data basis for smarT.NC is the
conversational program, you can modify data with the conversational
editor, for example, and show them in the form view.
Immediately understandable input forms (see area 1 in the figure at upper
right) make it easier to define the required machining parameters, which
are also displayed in a help graphic (
2 ). The structured program layout in
a tree diagram (see area 3 ) provides you with a quick overview of the
working steps in a part program.
The separate and universal operating mode smarT.NC provides an
alternative to the well known conversational programming. As soon as
you have defined a machining step you can graphically test it and/or run
it in the new operating mode.
1 1
2
1 3