HEIDENHAIN TNC 620 (73498x-02) - Manual (Page 184)

Programming: Programming contours
6.2 Fundamentals of Path Functions
6
184
TNC 620 | User's Manual
HEIDENHAIN Conversational Programming | 5/2013
Radius compensation
The radius compensation must be in the block in which you
move to the first contour element. You cannot activate radius
compensation in a circle block. Activate it beforehand in a straight-
line block (See "Path contours - Cartesian coordinates", page 194)
or approach block (APPR block, See " Approaching and departing a
contour", page 186).
Pre-position
Danger of collision!
Before running a part program, always pre-position
the tool to prevent the possibility of damaging it or
the workpiece.
Creating the program blocks with the path function keys
The gray path function keys initiate the plain-language dialog. The
TNC asks you successively for all the necessary information and
inserts the program block into the part program.