SMA SI 3.0-11 User Manual
SMA Equipment
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- 1 Information on this Document
- 2 Safety
- 3 Product Description
- 4 Starting and Stopping the System
- 5 Operation of the Sunny Island Inverter With the Sunny Remote Control
- 6 Data Storage and Firmware Update
- 7 Manually Controlling the Generator
- 8 Disconnecting the Sunny Island from Voltage Sources
- 9 Troubleshooting
- 9.1 Sunny Island Inverter Behavior Under Fault Conditions
- 9.2 Acknowledging Errors
- 9.3 Logged Events
- 9.4 Logged Warning Messages and Error Messages
- 9.4.1 Sunny Island Category (1xx)
- 9.4.2 Battery Category (2xx)
- 9.4.3 Generator or Utility Grid Category (3xx)
- 9.4.4 Generator Category (4xx)
- 9.4.5 Utility Grid Category (5xx)
- 9.4.6 Relay Category (6xx)
- 9.4.7 System Category (7xx)
- 9.4.8 External Device and Component Category (8xx)
- 9.4.9 General Category (9xx)
- 9.5 Frequently Asked Questions (FAQ)
- 9.6 Charging the Battery After Automatic Shutdown in Off-Grid Systems
- 9.7 Changing Slave Addresses in a Cluster
- 10 Cleaning and Maintenance
- 10.1 Cleaning and Checking the Sunny Island Inverter Enclosure
- 10.2 Cleaning the Sunny Remote Control
- 10.3 Performing a Manual Equalization Charge in the Off-Grid System
- 10.4 Checking the Function
- 10.5 Checking the Connections
- 10.6 Checking and Maintaining the Battery
- 10.7 Cleaning the Fans
- 10.8 Replacing the Battery
- 11 Decommissioning
- 12 Directory of the Parameters in User Mode
- 12.1 Inverter Category
- 12.2 Battery Category
- 12.3 Generator Category
- 12.4 Grid Category
- 12.5 SI Charger Category
- 12.6 Self Cnsmptn Category
- 12.7 Grid Cnsmptn Category
- 12.8 Grid Feed Category
- 12.9 Loads Category
- 12.10 PV System Category
- 12.11 System Category
- 12.12 Time Category
- 12.13 Identity Category
- 12.14 Password Category
- 13 Directory of the Parameters in Installer Mode and Expert Mode
- 14 Menu Structure
- 15 Contact