SMA SI 3.0-11 - Manual (Page 32)

5 Operation of the Sunny Island Inverter With the Sunny Remote Control SMA Solar Technology AG
32 SI30M-44M-60H-80H-BE-en-30 Operating Manual
5.4.7 Directly Accessing the Parameters
Any parameter can be accessed directly by entering a five-digit number. The five-digit number is composed as follows:
• The first three digits are the menu number.
• The last two digits are the parameter number.
Procedure:
1. Switch to installer mode on the Sunny Remote Control (see Section 5.4.1, page 29).
2. Select the parameter 600.02 Select Number and set the five-digit number.
☑ The parameter is displayed.
✖ The display shows Item not Found?
You cannot access the parameter in installer mode.
• Press the button and switch to expert mode (see Section 5.4.1, page 29).
The number set is incorrect.
• Press the button and enter the number again.
Example: Five-digit number for direct parameter access.
The parameter 111.01 TotInvPwrAt allows you to display the complete active power of the Sunny Island inverters in
a cluster. The five-digit number for direct access is 11101.