Yaskawa VS606 V74X V7 to V1000 - Manual (Page 30)

Product Transition Guide
PL. V1000-4X.01 Rev: 6/22/10
PL.V1000-4X.01 Transition Guide 6/22/10
Page 30 of 32
Yaskawa America, Inc.
V74X and V1000-4X Specification Differences
Category Feature Item V74X V1000-4X
Power Section Control Method – Sinewave PWM: V/f & OLV Sinewave PWM: V/f & Current Vector
Power Section Ratings 230v, 3ph. 0.125 to 10 HP 0.125 to 25 HP
Power Section Ratings 460v, 3ph. 0.5 to 10 HP 0.5 to 25 HP
Power Section
Maximum Output
Frequency
– 400 Hz (800 Hz optional) 400 Hz (1000 Hz optional)
Power Section Carrier Frequency – 10 kHz (model dependent) ND: 2 kHz; HD: 15 kHz (model dependent)
Power Section F
c
Default (derate) – Constant Swing PWM
Power Section
Braking Transistor
Circuit
– Built-in to 10 HP Built-in to 25 HP
Power Section
Short Circuit
Withstand Rating
– 18,000 A RMS Symmetrical 30,000 A RMS Symmetrical
Power Section Control Method – IM only IM / PM Control
Control Section Digital Operator Display LED 4x 7 seg. (LCD option) LED 5x 7 seg. (LCD option)
Control Section Digital Operator Number of Keys 6 8
Control Section Copy Function – Built-in Y-Stick USB copy unit option
Control Section Microprocessor – Single Dual
Control Section Control Method Pseudo-Closed Loop No Yes, w/ RP input
Control Section Macro Applications – No Yes
Control Section Digital Input Scan Rate 8 msec. 4 msec.
Control Section Analog Input Qty. 1 (Programmable) 2 (Programmable)
Control Section Analog Input Scan Rate 8 msec. 2 msec.
Control Section Analog Input Freq. Ref Voltage 15 Vdc 10.5 Vdc
Control Section Analog Output Scan Rate 8 msec. 2 msec.
Control Section Pulse Input Qty. 1 (Programmable) 1 (Programmable)
Control Section Pulse Input Input Frequency 33 kHz 33 kHz
Control Section Pulse output Qty. 1 (Programmable) 1 (Programmable)
Control Section Pulse output Output Frequency 1.44 kHz 33 kHz
Control Section Digital Operator Display 8 LED Indicators 6 LED Indicators
Control Section
Removable Terminal
Block
– No Yes (w / memory)
Control Section Thermistor Input PTC – No Yes
Control Section 2-Motor Control – No Yes
Control Characteristics Overload Capacity – 150% for 1 min. ND: 120% for 1 min.; HD: 150% for 1 min.
Control Characteristics Starting Torque – 150% @ 3 Hz (V/f) 150% @ 3 Hz (V/f), 200% @ 0.5 Hz (OLV)
Control Characteristics Speed Control Range Open Loop for PM N/A 1:10
Control Characteristics
Output Frequency
Resolution
– 0.01 Hz 0.001 Hz
Control Characteristics Auto-Tuning Automatic/OnLine No Yes, R1 and Rotational
Control Characteristics Elapse Time – No Yes (Power up or Run)
Control Characteristics Fault Storage – Last 4 Last 10 w / Elapsed Time Meter
Control Characteristics Fault Record – No Trace Data Points 15 Trace Data Points
Control Characteristics High Current Alarm HCA No Yes, 150%
Control Characteristics OV Suppression – Option- CASE Standard
Control Characteristics Torque Detection – Over-Torque Over and Under-Torque