Bang & Olufsen BeoCom 2 - Getting Started - Manual (Page 8)

8
Set the time and date
The time is shown when the phone is not in
use and when there is no new information in
the display. The time and date are also shown
with Caller ID and Redial information.
When you have set the number of phone
lines…
> Set clock? is shown in the display.
> Press OK to be able to set the clock, or press C
if you wish to skip this step.
> Push the Track point up or down to set the
hour.
> Press OK to store and move to the minutes
setting.
> Complete the setting of the clock.
> Press OK to set the time and date.
> Push the Track point up or down to set the
year and press OK to store it.
When you have set the time and date…
> The display prompts you to register another
handset.
> If you have additional handsets to register, press
OK. The base is open for a new five-minute
period, and you can repeat the registration
procedure on the next handset.
> If you do not have additional handsets, press C
to leave the menu.
After you have set the time and date for the first
handset, the time and date are set automatically
for all the additional handsets you register to the
same base.
You can set the time and date via the Settings
menu. For further information, refer to the
chapter ‘Select settings for daily use’ on page 32
in the Guide.
OK
OK
Register more
handsets?
Set clock?
Set time
8:00 p
OK
...
Set date
Jan 1, 2003
Stored
Jan 12 8:30 a