Olympus OM-D E-M1 Mark II - Manual (Page 88)

88 EN
Menu functions (Shooting menu)
4
Processing options ( Picture Mode)
You can make individual adjustments to contrast, sharpness and other parameters in
[Picture Mode] (P. 61) settings. Changes to parameters are stored for each picture mode
separately.
1 Select [Picture Mode] in
W Shooting Menu 1 and
press the
Q button.
• The camera will display the picture mode available in the
current shooting mode.
j/ Y/
1
2
LN
100 %
Off
Shooting Menu 1
Reset / Custom Modes
Picture Mode
Image Aspect
Digital Tele-converter
Back Set
2 Select an option with
FG and press the Q button.
• Press
I to set the detailed options for the selected picture mode. Detailed options are not
available for some picture modes.
• Changes to contrast have no effect at settings other than [Normal].
% Tips
• You can reduce the number of picture mode options displayed in the menu.
g [Picture Mode Settings] (P. 115)
Image quality (
KK)
g “Selecting image quality (KK)” (P. 55)
• You can change the JPEG image size and compression ratio combination, and [X] and
[W] pixel counts. [K Set], [Pixel Count]
g “Combinations of JPEG image sizes and
compression rates” (P. 131)
Digital Zoom ( Digital Tele-converter)
Digital Tele-converter is used to zoom in beyond the current zoom ratio. The camera
saves the center crop. The subject is nearly doubled in size.
1 Select [On] for [Digital Tele-converter] in
W Shooting Menu 1.
2 The view in the monitor will be enlarged by a factor of two.
• The subject will be recorded as it appears in the monitor.
• This function cannot be used in multiple exposure shooting.
• This function is not available when the information of [Movie Effect] is displayed on the
screen in movie mode.
• This function is not available when [Movie 6] is assigned to a button with [
n Button
Function].
• When a RAW image is displayed, the area visible in the monitor is indicated by a frame.
• AF target drops.
• H is displayed on the monitor.