Auriol Z31743A_B - Manual (Page 22)

22 GB
Press the SET / RESET button 20 while the
maximum and minimum values, are being dis-
played to reset the values.
Press the SELECT button, to return to the
default display.
Displaying temperature trends
After successfully connecting with the outdoor
sensor, the weather station can display the tem-
perature trend (outdoor)
1 and the temperature
trend (indoor) 5 .
You may see the following displays:
= The temperature is rising.
= The temperature is constant.
= The temperature is falling.
Battery state display
The 3 and 7 symbols appear in the
weather station’s LC display if the batteries in the
outdoor sensor or the weather station are weak.
Replacing the batteries
Open the battery compartment 24 or 30 .
Remove the exhausted batteries.
Insert two new 1.5 V
batteries (AA) into the
battery compartments.
Note: Make sure you fit the batteries the
right way round (polarity). This is shown in
the battery compartments (see Figs. C + E).
Close the battery compartments.
96385_aur_Temperaturstation_content_PL_HU_SI_CZ_SK.indd 22 13.01.14 12:33