EMC CLARiiON - Manual (Page 17)

About EMC Navisphere software 1-5
About the CLARiiON Server Applications
Admhost Utility The Admhost Utility is an executable program that you can run
interactively via script. It runs only on Microsoft Windows Server
™
2003 or Windows ® 2000 operating systems, and works with
layered-driver applications (for example, SAN Copy ™ , SnapView ™
and MirrorView ™ /A devices), and non-layered-driver devices.
Use admhost commands to
◆ Scan for new storage devices
◆ Assign drive letters to the devices
◆ Make storage devices inaccessible to the server operating system
◆ Flush cache data to disk
◆ List drive letters and worldwide names for all server devices
Important The Admhost Utility is supported on CX-Series, FC-Series, and
AX-Series storage systems that have been upgraded to Navisphere Manager,
that is, that have the Navisphere Manager Enabler installed.
Admsnap Utility The Admsnap Utility is an executable program that you can run
interactively or via a script to manage SnapView clones and
snapshots. The Admsnap Utility resides on the servers connected to
the storage system with the SnapView driver installed. Admsnap
runs on Microsoft Windows Server 2003 or Windows 2000.
Important Unless indicated otherwise, all references to a Windows server
refer to Windows Server 2003 or Windows 2000 servers only.
Use admsnap commands to:
◆ Scan for new storage devices
◆ Assign drive letters to the devices
◆ Make storage devices inaccessible to the server operating system
◆ Flush cache data to disk
◆ List drive letters and worldwide names for all server devices
◆ List current snapshot devices
◆ Map and unmap to a SnapView session
◆ Start and stop a SnapView session
Important The Admsnap Utility is supported on CX-Series, FC-Series, and
AX-Series storage systems that have been upgraded to Navisphere Manager,
that is, that have the Navisphere Manager Enabler installed.