EMC CLARiiON - Manual (Page 80)

A-22 EMC CLARiiON Server Support Products for Windows Installation Guide
Silent Installations and Removals
Performing a silent installation
1. On another attached Windows server (not the same server on
which you created the response file), enter one of the commands
below to install the Server Utility.
Setup.exe -s -f1 fullpath\responsefilename -f2fullpath\logfilename
where
-s
Indicates a silent installation. A silent installation requires no
input after you enter the command.
-f1 fullpath\responsefilename
Specifies the full pathname of the response file you created in
step 1 on page A-21.
-f2 fullpath\logfilename
Specifies the full pathname and filename of the log file. We
recommend that you create the log file on a local directory so
you do not override a log file from another server’s
installation.
2. Verify that the installation was successful (see Verifying the silent
installation or removal on page A-32) before running the command
on all remaining attached Windows servers.