EMC CLARiiON - Manual (Page 70)

A-12 EMC CLARiiON Server Support Products for Windows Installation Guide
Silent Installations and Removals
Performing a silent installation
1. On another attached Windows server (not the same server on
which you created the response file), enter one of the commands
below to install the Host Agent.
• If your server has an existing configuration file and you do not
want to replace it during the installation, enter:
Setup.exe -s -f1 fullpath\responsefilename
-f2 fullpath\logfilename
where
-s
Indicates a silent installation. A silent installation requires
no input after you enter the command.
-f1 fullpath\responsefilename
Specifies the full pathname of the Host Agent response file
you created in step 1 on page A-10.
-f2 fullpath\logfilename
Specifies the full pathname and filename of the log file. We
recommend that you create the log file on a local directory
so you do not override a log file from another server’s
installation.
For example
Setup.exe -s -f1E:\aSafeDir\agentInst.iss
-f2C:\aLocalSafeDir\agentInst.log
• If you are installing a new configuration file or overriding an
existing configuration file, enter:
Setup.exe -userid userid -server servername | -cfgfile "fullpath
and configuration file filename" -override -s
-f1
fullpath\responsefilename -f2fullpath\logfilename
Important If you are creating a new configuration file or overriding
an existing configuration file, you must specify at the -userid with the
-server
switch or the -cfgfile or -override switch.