EMC CLARiiON - Manual (Page 44)

4-2 EMC CLARiiON Server Support Products for Windows Installation Guide
Installing and Using the Admhost and Admsnap Utility
Installing the Admhost Utility
The Admhost Utility is supported only on the following Microsoft
Windows platforms: Windows Server 2003 or Windows 2000.
For the supported versions of these operating systems, see the Admhost
Release Notes.
To install the Admhost Utility on a server
If you have VMware ESX Server, install the admhost utility on the VMware
Windows Virtual Machine.
1. Log in to the Windows server or VMware Windows Virtual
Machine as the administrator or as someone who has
administrator privileges.
2. You cannot install admhost over an existing revision. If you think
admhost is already installed, remove it using the sequence:
Start
>
Settings
>
Control Panel
>
Add/Remove Programs
>
Navisphere Admhost
and click Add/Remove.
3. In the server’s drive, insert the server support CD that shipped
with your storage system or your upgrade kit (for AX-Series
systems upgrading to Navisphere Manager).
The server support menu opens.
If you do not see the server support menu, follow these steps to
open it:
a. From the Windows taskbar, select
Start > Run
b. In the Run dialog box, enter the following program name, and
then click OK:
drive:\CXSeries.exe
where drive is the letter for the CD drive.
4. From the main menu select Install Products on Server.
The INSTALL PRODUCTS page opens.