EMC CLARiiON - Manual (Page 36)

3-12 EMC CLARiiON Server Support Products for Windows Installation Guide
Installing and Using the Navisphere Host Agent or Server Utility
Using the Host Agent
This section describes how to start and stop the Host Agent service.
This section also describes how to configure the storage system
connected to the server.
Starting the Host Agent service
If the Navisphere Host Agent service is not set to start automatically
at system startup, do the following:
1. At the Windows server, log in as the administrator or the
equivalent.
2. From the desktop, right-click My Computer and select
Manage > Services and Applications > Services
The Services pane opens.
3. In the Services pane, right-click Navisphere Agent and select
Start .
4. If you want the Host Agent to start automatically at system
startup:
a. Right-click Navisphere Agent and select Properties.
The Navisphere Agent Properties dialog box opens.
b. Select the General tab.
c. In Startup Type, select Automatic.
The Host Agent will now start automatically at system startup.
5. Close Computer Management.
It may take a few minutes for the Host Agent to start in either of the
following situations:
◆ Applications are using the storage system.
◆ The SP event log is large and the Host Agent configuration file is
not set up.