EverFocus EMV1200 - Manual (Page 11)

3
1.3 SPECIFICATIONS
EMV1200 / 800 – 12 / 8 Channel Mobile DVR
Video Format NTSC/PAL (auto detected by system)
Operating System Embedded Linux with special small monitor friendly GUI
Video Input
12 / 8 channels (vibration resistant locking Molex connectors –
Interface cables to BNC-F supplied: 3X / 2X groups of 4 cameras
each)
Video Output
Main monitor: 1 composite BNC rear panel / 1 front panel RCA
output
Call monitor: 1 composite BNC rear panel
Video Compression H.264
Video Display Full, 4/9/12, Sequence
Recording Resolutions
(set independently per
camera)
NTSC: 720x480/720x240/360x240
PAL: 704x576/704x288/352x288
Audio Inputs
12 / 8 line in (vibration resistant locking Molex connectors -
Interface cables to RCA-F supplied:3X / 2X groups of 4 cameras
each)
Audio Outputs 1 front panel RCA line out, 1 rear panel RCA line out
Alarm Inputs
12 / 8 alarm inputs (vibration resistant locking Molex connectors -
Interface cables supplied)
Alarm Outputs
2 alarm outputs (form “C”; contacts rated at 30V AC/DC @ 1
amp – interface cables supplied)
Storage 3.5" HDD x 1 (up to 2TB ) or 2.5" HDD x 1 (up to 1TB )
Recording Rate
12CH
NTSC: D1 120fps, 2CIF 240fps & CIF 480fps(duplex) if set
globally
PAL: D1 100fps, 2CIF 200fps & CIF 400fps(duplex) if set globally
8CH
NTSC: D1/2CIF/CIF 240fps if set globally
PAL: D1/2CIF/CIF 200fps if set globally
Per camera resolutions and record rates can be set individually
per camera through the OSD menus up to the maximum record
capacity of 480 NTSC (400 PAL) / 960 NTSC (800 PAL) CIF
equivalent FPS
Recording Mode
Continuous recording, event recording, continuous + event
recording
(Rate and resolution in each mode set independently per camera)
Record Quality Adjustable in five levels per camera per Record Mode
Pre Alarm Recording Optional; 5 second interval
Playback Rate
12CH
NTSC: D1 120fps, 2CIF 240fps & CIF 480fps(duplex)
PAL: D1 100fps, 2CIF 200fps & CIF 400fps(duplex)
8CH
NTSC: D1/2CIF/CIF 240fps
PAL: D1/2CIF/CIF 200fps