EverFocus EMV1200 - Manual (Page 97)

89
4.8.6 SERVICE
Figure 4-49 System-Service.
Firmware
Current Firmware Version: Displays the current version.
Upgrade from USB: Press “Upgrade” to upgrade the firmware.
NOTE: To perform a Firmware Upgrade, you will need to connect a USB flash device with
the desired firmware. Do not disconnect the USB device or turn off the power to the
unit during the upgrade; this can cause the system to fail to recover, requiring factory
service to repair.
Configurations
Load Factory Default: Click “Load” to restore all menu settings to the default values. User Account,
Network IP Settings, and Time are not affected.
Load From USB: Click “Load” to upload saved DVR configuration settings from a USB flash device.
Save To USB: Click “’Save” to save the current DVR configuration settings to a USB flash device.
Allowed Remote Reboot: Check the box to enable remote reboot from remote web page.
Click button to return to the previous level of menu.