Casio CTK-7200 - Manual (Page 117)

Using the Pattern Sequencer
E-115
1.
On the pattern sequencer screen, select the
“Recorded Data” or “Empty” status instrument
part whose events you want to edit.
• You can perform event editing on one of the following
types of parts.
2.
While holding down the R-13 (FUNCTION)
button, press the C-5 (EDIT) button to display
the edit menu.
3.
Use the R-17 (t, y) buttons to move the 0 to
“EventEdit” and then press the R-16 (ENTER)
button.
• This displays the event editor screen shown below. For
information about display contents, see “Event Editor
Screen Contents” (page E-114).
4.
Perform the following operations.
To edit events with the pattern sequencer
– A “Recorded Data” or “Empty” status part that you
are currently editing using the procedure under “To
edit an existing rhythm” (page E-107)
– A “Recorded Data” or “Empty” status part that you
are currently editing using the procedure under “To
create a new rhythm from scratch” (page E-111)
– An “Empty” status part that has undergone one of
the procedures under “To clear all rec areas
included in the currently selected rhythm” (page
E-120), “To clear a rec area of an instrument part”
(page E-118), or “To clear all instrument part rec
areas included in an accompaniment pattern” (page
E-120)
– A “Recorded Data” status part that has undergone
the procedure under “To copy preset or user rhythm
instrument part data to a rec area” (page E-119)
To do this:
Perform this procedure,
starting from step 2:
Change the settings of already
recorded event data “To edit an existing event”
(page E-92)
Delete an individual event “To delete an individual event”
(page E-92)
Delete all events in a track “To delete all events in a track”
(page E-93)
Delete all events within a
specific range of the part being
edited “To delete all events in a
specific range of a track” (page
E-93)
Insert events “To insert an event” (page
E-94)
Copy events within a specific
range to a desired location “To copy the events within a
specific range to a desired
location” (page E-94)
Quantize an individual note
event “To quantize an individual note
event” (page E-95)
Quantize all note events in the
part being edited “To quantize all note events in
a track” (page E-96)
Quantize all note events in a
specific range of the part being
edited “To quantize all note events
within specific range of a track”
(page E-96)
Delete pitch bender events “Deleting Pitch Bender Events”
(page E-97)
Step input of note events “To perform step input” (page
E-100)
*1
Batch adjust the velocity
(intensity) of note events
included in the part being
edited “To adjust the velocity value of
a note event” (page E-98)
Batch adjust the gate time
(length) of note events
included in the part being
edited “To adjust the gate time value
of a note event” (page E-99)
Select the types of events that
appear on the event editor
screen “To select the types of events
that appear on the Event Editor
screen (View Select)” (page
E-92)
*2
*1 The “SysTrack” item on the input menu is not a pattern
sequencer event editor item.
*2 There are three view select setting items: Note,
PitchBend, and Modulation.
CTK7200_e.book 115 ページ ２０１４年３月７日 金曜日 午後３時４分