Casio CTK-7200 - Manual (Page 55)

Using Drawbar Organ Tones
E-53
The table below shows the parameters that can be configured on the drawbar editor screen.
The settings marked with an asterisk (
*) in the “Setting Range” column are initial defaults.
• While the drawbar edit screen is displayed, you can change the parameters of drawbar 16' through 1' using sliders D-4 (16')
through D-12 (1').
Drawbar Organ Tone Parameter Settings
Parameter Name Setting Setting Range
Ft16' to Ft1'
(Drawbar 16' to Drawbar 1') Adjusts a tone’s foot “length” harmonic overtone levels (16' to 1'). 0 * to 8
Perc. 2nd
(2nd Overtone Percussion) When “on”, a percussion sound with 2nd harmonic (2nd) or 3rd harmonic
(3rd) pitch is applied to notes.
*1
oFF *, on
Perc. 3rd
(3rd Overtone Percussion) oFF *, on
Perc.Decay
(Percussion Decay Time) Specifies the decay time of percussion sound. A larger value specifies a
longer decay time. 000 * to 127
On Click
(Key On Click) When “on”, a click is sounded when a note starts to sound. oFF *, on
Off Click
(Key Off Click) When “on”, a click sound is added when a keyboard key is released. oFF *, on
Type
(Wave Type) “Sin” (Sine) is a waveform that does not include noise, while “Vin”
(Vintage) is a waveform that includes characteristic noise of an electric
organ. Sin *, Vin
Vib.Rate
(Vibrato Rate) Specifies the speed of the vibrato applied to a note. 000 to 64 * to 127
Vib.Depth
(Vibrato Depth) Specifies how much vibrato is applied to a note. 000 * to 127
DSP On Off
to
Rot Button Off Value For information about these parameters, see the items starting from “DSP On Off (DSP On/
Off)” under “Tone Parameter Settings” (pages E-48 through E-49).
*1 Makes sustained tones more lively. A percussion sound is sounded at its strongest immediately after a keyboard key is
pressed, and then gradually decays in accordance with the “Perc.Decay” setting. Though keeping keyboard keys depressed
will continue to sound organ notes, only the percussion sound decays.
CTK7200_e.book 53 ページ ２０１４年３月７日 金曜日 午後３時４分