Casio QV-R80 - Manual (Page 15)

15
Getting Started
LED indicator Operation
IMPORTANT!
• Charging is not possible if the computer is in a rest or standby state.
• A charging error can occur immediately after charging begins or some time after
charging begins. A charging error is indicated by the LED indicator flashing green
at high speed.
• Leaving the camera for about 48 hours with no power supplied while the battery is
dead will cause its date and time settings to be cleared. A message telling you to
configure time and date settings will appear the next time you turn on the camera
after restoring power. When this happens, configure date and time settings (page
64).
Other Charging Precautions
• Never use any other type of charger device. Attempting to use a different charger
can result in unexpected accident.
• USB charging devices and power supply devices are subject to fixed standards.
Use of an inferior device or a device that is not up to standard can cause
malfunction and/or failure of your camera.
• Operation is not guaranteed in the case of a computer built or modified by you.
Even in the case of a commercially available computer, certain USB port
specifications may make it impossible to charge via the USB cable.
• A battery that is still warm due to normal use may not charge fully. Give the battery
time to cool before charging it.
• A battery discharges slightly even when it is not loaded in the camera. Because of
this, it is recommended that you charge the battery immediately before you need to
use it.
• Charging the camera’s battery may cause interference with TV and radio reception.
If this happens, plug the charger into an outlet that is further away from the TV or
radio.
• Actual charging time depends on current battery capacity and charging conditions.
• Do not use the USB-AC adaptor with any other device.
Indicator Status Description
Flashing green Charging
Flashing green, fast Charging problem (page 82)
Off Charging complete
LED indicator