Powerplus POWXG9006 HIGH PRESSURE CLEANER 163CC EN - Manual (Page 10)

POWXG9006
EN
Copyright © 2013 VARO P a g e | 10 www.varo.com
10.3 Start engine
Turn the fuel lever (picture 2, part 21) to the ON
position.
Set the choke lever (picture 2, part 20) to the ON
position.
Turn the engine ON/OFF switch (picture 3, part
22) to the ON position
Hold down the engine firmly with one hand on the
frame. With the other hand grip the recoil starter
cord (picture 1, part 17) handle and pull slowly
until resistance is felt indicating that the recoil
starter (picture 1, part 18) is engaged. When
resistance is felt pull the cord sharply. Continue
this procedure until the engine starts.
When the engine has been successfully started
and is running smoothly return the choke lever
(picture 2, part 20) to the OFF position