Powerplus POWXG9006 HIGH PRESSURE CLEANER 163CC EN - Manual (Page 11)

POWXG9006
EN
Copyright © 2013 VARO P a g e | 11 www.varo.com
When the engine is running, the speed can be
adjusted by moving the throttle control lever
(picture2, part 19). When you slide the throttle to
the right the engine will have a lower rotation
speed. To obtain a higher rotation speed you have
to slide the throttle more to the left.
10.4 Stop the engine
To stop the engine, turn the engine ON/OFF
switch (picture 3, part 22) to the OFF position.
Warning! After the engine has stopped turn off the water supply to the pressure washer and
release all remaining pressure by operating the trigger until there is no more pressure in the
appliance and the water flow stops, secure the trigger with the safety lock (picture1, part 5) to
prevent unintentional operation.
Disconnect the lance and drain any residual water from all hoses (picture 1, part 7), carefully
coil the hoses ensuring that they are not kinked or twisted and check for any other damage,
replace any damaged hoses. Damaged hoses can be dangerous under pressure.
When the engine has stopped and before storage,
turn the fuel lever (picture 2, part 21) to the OFF
position