Powerplus POWXG9006 HIGH PRESSURE CLEANER 163CC EN - Manual (Page 15)

POWXG9006
EN
Copyright © 2013 VARO P a g e | 15 www.varo.com
16 TROUBLE SHOOTING
PROBLEM CAUSE ACTION
Fluctuating pressure Pump sucking in air
Valves dirty, worn out or
seized
Blocked jet Check connections are tight.
Remove blockage using jet cleaning
tool
Water leaking from pump Seals worn out Contact customer helpline
The pump does not reach
the required pressure Pump sucking air from
connections or hose Check tightness of all connections
Suction/delivery valves are
clogged Clear or replace valves. Have
machine checked by Service Centre
Unload valve is stuck Loosen and re-tighten regulating
screw
Lance or nozzle worn out Check and/or replace
Pump is running but no
water delivery Kinked inlet and or pressure
hose Check, straighten and replace if
required
Blocked inlet filter Remove and clean filter
Blocked jet Remove blockage using the nozzle
cleaning tool.
17 WARRANTY

This product is warranted as provided by law for a 36 months period effective from the
date of purchase by the first user.

This warranty covers all material or production flaws excluding : batteries, chargers,
defective parts subject to normal wear & tear such as bearings, brushes, cables, and
plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects
resulting from maltreatment, accidents or alterations; nor the cost of transportation.

Damage and/or defects resulting from inappropriate use also do not fall under the
warranty provisions.

We also disclaim all liability for any bodily injury resulting from inappropriate use of the
tool.

Repairs may only be carried out by an authorised customer service centre for Powerplus
tools.

You can always obtain more information at the number 00 32 3 292 92 90.

Any transportation costs shall always be borne by the customer, unless agreed otherwise
in writing.

At the same time, no claim can be made on the warranty if the damage of the device is the
result of negligent maintenance or overload.

Definitely excluded from the warranty is damage resulting from fluid permeation, excessive
dust penetration, intentional damage (on purpose or by gross carelessness), inappropriate
usage (use for purposes for which the device is not suitable), incompetent usage (e.g. not
following the instructions given in the manual), inexpert assembly, lightning strike,
erroneus net voltage. This list is not exhaustive.

Acceptance of claims under warranty can never lead to the prolongation of the warranty
period nor commencement of a new warranty period in case of a device replacement.

Devices or parts which are replaced under the warranty therefore remain the property of
Varo NV.

We reserve the right to reject a claim whenever the purchase cannot be verified or when it
is clear that the product has not been properly maintained. (Clean ventilation slots, carbon
brushes serviced regularly, etc.).

Your purchase receipt must be kept as proof of date of purchase.