Epson VIGOR 3300 User Manual
Page 120
Vigor3300 Series User’s Guide
116
numbers of 03654321 and 04556890. In which, 03654321 is
suitable for this speed dial rule.
Strip Length
Assign the length of digit to be removed from the original
phone number. For example, suppose the original phone
number is 03654321 and the strip length is 2. The first two
numbers (03) will be removed and the final phone number
becomes 654321.
Append
Assign a new number to be added before the phone number
(after removing length of digit). For example, suppose the
original phone number is 03654321. The strip length is 2 and
the append number is 886. Then, the final phone number will be
886654321.
Destination
Assign an IP address for the destination which the SIP message
would be sent to.
Memo
A description for this entry.
3
3
.
.
7
7
.
.
5
5
M
M
i
i
s
s
c
c
e
e
l
l
l
l
a
a
n
n
e
e
o
o
u
u
s
s
This page includes RTP and T.38 Starting Port, T.38 Redundancy Number, VoIP ToS, and
FAX Ringing settings.
RTP Starting Port
The starting port number for RTP protocol packet. The default
setting is 13456.
T.38 Starting Port
The starting port number for T.38 protocol packet. The default
setting is 49170.
T.38 Redundancy Number The redundancy number (how many payloads attaching to the
tail of the packet) for T.38 protocol. The default value is 1.
Dialing Completion
Users might dial with incomplete phone number and wait for