Epson VIGOR 3300 User Manual
Page 32
Vigor3300 Series User’s Guide
28
3
3
.
.
1
1
.
.
4
4
A
A
c
c
c
c
e
e
s
s
s
s
C
C
o
o
n
n
t
t
r
r
o
o
l
l
This page allows you to determine which services (HTTP/Telnet/SSH) is used for the user to
access Vigor3300 Series. In addition, you can also limit some hosts to access Vigor3300
Series with specified IP address.
In the System group, click the Access Control option. You will get the following page:
Management Method
There are three management methods provided here for you to
choose for your router. Check HTTP/Telnet/SSH for the router.
Allow Management from
the WAN
Disable - Disable the management from the WAN interface.
Enable All - Enable all management (through
HTTP/Telnet/SSH) from the WAN interface.
Enable User Defined WAN IP - System can be managed by
these three IP addresses via WAN.
Allowed IP1(to 3) - Type in IP address (up to three) for
managing the system.
Management Port
Default Ports - Use the default ports for HTTP and Telnet if
you choose HTTP and Telnet as management methods.