Epson VIGOR 3300 User Manual
Page 45
Vigor3300 Series User’s Guide
41
D
D
H
H
C
C
P
P
C
C
l
l
i
i
e
e
n
n
t
t
S
S
e
e
t
t
u
u
p
p
If the WAN interface is set as a DHCP client, the Vigor3300 Series will ask for IP network
settings from the DHCP server or DSL modem automatically. It is not necessary for users to
manually configure the router.
Detect Type
Select a detecting type for this WAN interface. There are three
ways Send ARP to Gateway, Send PING and Send HTTP
Request supported in the router.
Detect Interval (sec)
Assign an interval period of time for each detecting. The
minimum value is 3 and no limit for maximum value.
No-Reply Count
Assign detecting times to ensure the connection of the WAN.
After passing the times you set in this field and no reply
received by the router, the connection of WAN interface will be
regarded as breaking down.
Detect Destination Host
(IP or Domain Name)
Assign an IP address or Domain name as a destination to be
detected whether the host is active (sending reply to the
router) or not. If not, the connection of WAN interface will be
regarded as breaking down. This function is available when
Detect Type is set with Send PING or Send Http Request.