Enlight EN-898X - Manual (Page 27)

27
Note:
Issuing a SCSI reset message or SCSI bus device reset
message does not change the state of the indicator lights.
3HDD Back Plane
1. SCSI Connector: Connect SCSI cable.
2. Front panel Connector: Connector for LED board with
cable.
3. Switch: there is one button at the back plane.
This is function of noise elimination
4. ID Select（4 ID group）
| + + + +|
| + + + +|
1 2 3 4
1,2 —— be used to choose the I2C address
3,4 ——be used to choose the ID of HDD