Enlight EN-898X - Manual (Page 6)

6
Specifications
EN-898X Rackmount Chassis Specifications
Mainboard for factor follow SSI & ATX 12” x 13” specification
Power Supply follow SSI (provide 480W Single Power Supply)
LED Indicators Front Bezel:
Voltage alarm(Voltage =5V, Beep Alarm LED
Blinking 4.57 － 5.51/ Voltage =12V, Beep Alarm LED
Blinking 11.25-12.7)
FAN fail(Below 2800 rpm Beep Alarm LED Blinking),
Temperature alarm(Over 60℃ and return to 55℃ Beep
Alarm LED Blinking)
HDD activity, Power, NIC activity, System error
Pre HDD Tray: Active & HDD status x 1 (twin color LED)
Cooling Fans 8981:4 x internal 80 x 80 x 25mm cooling fans
8982/8983: 4 x internal 80 x 80 x 38mm Easy-swap cooling
fans /3 x rear 40 x40 x 20mm cooling fans
Back Plane 8982:1(2 8983) SCSI Back plane support Ultra 320
Support up to 15,000 RPM SCSI hard disk
Support 1” SCA-2 HDD with ID setting
Drive Bays
Hard Disk Trays IDE:
8981:4x 1” IDE drive bays
8982: 6 x 1” SCSI drive bays
8983: 9 x 1” SCSI drive bays
FDD 8981/8982:1 standard FDD bay
CD-ROM 8981/8982:1 slim CD-ROM bay and 5.25” drive bay
PCI Slot
898X C01 3 x standard PCI adapter slots
898X D01 6× Low-profile PCI adapter slots
898X E01 2x standard PCI adapter slots
Switch 1 Power switch 1 Reset switch 1 ACPI switch
1 NMI switch USB1 USB2
Annunciator FAN fail, Volt Alarm, TEMP Alarm
Dimensions (W x H x D) 430 x86.7x 674.2mm
Weight 8981:10.5 kg (chassis only) 8982/8983: 12.5 kg (chassis only)