Enlight EN-898X - Manual (Page 8)

8
PIC 3.1
Mounting the Server Board
With the cover off, you can now mount the server board in the
chassis. Before you begin, make sure you have the server board
and other associated components (processors, memory, and
mounting hardware) available.
To mount the server board:
1 Fix the motherboard’s screws. And save the screws.
2 Fix the I/O shields. To position the shield correctly, the outline of
the connectors on the I/O shield should be view able from the
chassis opening.
3 Insert connector edge of the server board into the chassis first
making sure the connectors are properly seated in the I/O shield.
4 Lie board flat on the standoffs that are located on the chassis
floor.