EverFocus EDSR400M - Manual (Page 37)

(7) ALARM - RESET TYPE:
N.O. : Normal Open
N.C. : Normal Close
(8) ALARM DURATION TIME :
When any sensor alarm connected to the device is activated,
the device will immediately react an alarm and display the warning message.
This entry is used to set the alarm duration from 1second to 99 second.
(9) PRE-ALARM OPERATION :
ON : Record the picture in pre -alarm recording speed in pre -alarm period.
OFF : No pre -alarm recording before alarm occurs.
(10) RECORDING SPEED :
The recording speed in pre -alarm period.
Notice :
If the alarm occurs when it is in standby mode or in normal recording mode,the recording quality will be the
same as the normal recording quality.
If the alarm occurs when it is in timer recording mode , the recording quality will be the same as the value
set in timer recording quality.
MENU
23
: Press or to move the cursor to the left or right.
: Press or to change the value.