EverFocus EDSR400M - Manual (Page 42)

MENU
(1) RS232 BAUD RATE: There are 6 different speeds that can be used to transmit instruction or
information through the RS232 port on the device, 1200 baud,2400 baud,4800 baud,9600 baud,
19200 baud,and 3840 baud. The default setting from the factory is 9600 baud.
(2) RS232 STOP BIT: Select stop bit: 1 or 2
(3) RS232 PARITY: Select parity lever: NONE/ODE/EVEN
(4) RS485 DATA BIT: Select data bit : 8 or 7
(5) RS485 BAUD RATE: There are 6 different speeds that can be used to transmit instruction or
information through the RS485 port on the device, 1200 baud,2400 baud,4800 baud,9600 baud,
19200 baud,and 3840 baud.
(6) RS485 STOP BIT: Select stop bit: 1 or 2
(7) RS485 PARITY:Select parity lever: NONE/ODE/EVEN
(8) RS485 DATA BIT: Select data bit : 8 or 7
(9) RS232/RS485 ID:
This entry is used to assign each device with its own ID code, when more than on unit is used in one
system through RS232/RS485.
There are two ID code for the Digital video recorder : 0 01 or 002
28
RS232/RS485 SETTING MENU
6.11 RS232/RS485 SETTING MENU
RS232 BAUD RATE
RS232 STOP BIT
RS232 PARITY
RS232 DATA BIT
RS485 BAUD RATE
RS485 STOP BIT
RS485 PARITY
RS485 DATA BIT
RS232/RS485 ID
In the RS232/RS485 SETTING MENU, we define
: Press or to move the cursor to the left or right.
: Press or to change the value.
: 9600 BPS
: 1
: NONE
: 8
: 9600 BPS
: 1
: NONE
: 8
: 001