EverFocus EDSR400M - Manual (Page 46)

(4) LOAD DEFAULT :
YES/NO : Load the Load System.
YES : The double check dialog will appear on the screen.
MENU
32
(5) PASSWORD INABLE:
Password is used to prevent unauthorized personnel to change any setup of the device.
Set “ NO” to release password function, set “ YES” to enable password function.
(6) PASSWORD:
With up to 6 characters is supported in the digital video recorder.
The available alphanumeric characters are:
0,1,2,3,4,5,6,7,8,9,
A,B,C,… … X,Y,Z
/ ( ) . - * & @ : “
The factory default setting for password is disable.
Note: Security Lock Setting:
When the image recording, press “ STOP” to enter the password.
The screen will show as below:
INPUT PASSWORD
123456 DONE
PRESS MENU TO EXIT
: Press or to move the cursor to the left or right.
: Press or to change the value.