EverFocus EDSR400M - Manual (Page 41)

MENU
(1) MAIN MONITOR :
DWELL TIME : The main Dwell Time determines the rate at which the sequences cameras
on the main monitor. The dwelling time for the auto sequencer can be set between
( 0-99) seconds.
SEQ WITH QUAD:
ON: The quad screen display is under the auto sequential switching mode.
OFF:The quad screen display is not under the auto sequential switching mode.
(2) CALL MONITOR :
DWELL TIME :The main dwell time determines the rate at which the sequences cameras
on the call monitor. The dwelling time for the auto sequencer can be set between
( 0-99) seconds.
OPERATION: This entry allow the user choose the channel form CH1 to CH 4 fo r sequence screen.
Note: Call monitor will display automatically when alarm working.
27
SEQUENCE SETTING MENU
6.10 SEQUENCE SETTING MENU
MAIN MONITOR
DWELL TIME: 03 SECS
SEQ WITH QUAD: YES
CALL MONITOR
DWELL TIME: 03 SECS
OPERATION: CH1
In the SEQUENCE SETTING MENU, we define
: Press or to move the cursor to the left or right.
: Press or to change the value.