Euphonix System Digital Audio Mixing System 5B - Manual (Page 26)

System 5-B Digital Audio Mixing System Operation Manual Quickstart to Common Task
26
4. Connect the CD’s digital output (AES or SDIF) to channels 1 and 2 on the
DM714.
The DM714 should already be connected to the first input on the Studio Hub
(SH612 1-1).
5. Select Device Outputs, then select Hub 1-1 from the left of the screen.
6. Under Device Outputs - Hub1-1, click in the Name column for channel 1 and
name the device CD Player Left; click in the Name column for channel 2 and
name it CD Player Right.
7. Click the green selection fields next to channels 1 and 2 to add those patch
points to Selected - Sources.
8. Click the Patch button.
9. Select Console I/O, select A and B Inputs, click in the Name column for
channels 1 and 2 and name them CDL and CDR, respectively.
10. Press the Main Panel key and select Channels.
11. Press the Setup key and then press Show Input Names.
This displays the input names on the TFT display above the channel.