Euphonix System Digital Audio Mixing System 5B - Manual (Page 80)

System 5-B Digital Audio Mixing System Operation Manual CM402 Center Section
80
6.3 Bus Routing Panel
Figure 6-5 Bus Routing Panel
This panel shows the Group and Main Bus routing for channels assigned to the Center
Strip. The Grp Route, Main Route, and Grp Section switches along the bottom of the
panel determine the information being displayed and controlled. These switches intercan-
cel: only one can be lit and active at a time. The Pan To: GRP Busses and MAIN Busses
keys allow panning to the Group and Main busses (lit) or disables panning (unlit).
NOTE: The Reverse Route switch is not currently operational.
6.3.1 Grp Route
When the Grp Route key is lit, all 48 switches indicate Group Bus routing. The green
number LEDs light to indicate the available busses. The switches light to show that the
Center Strip channel is routed to that Group Bus.
6.3.2 Main Route
When the Main Route key is lit, all 48 switches indicate Main Bus routing. The green
number LEDs light to indicate the available busses. The switches light to show that the
Center Strip channel is routed to that Main Bus.
6.3.3 Grp Section
This is the default mode of operation. The top two rows indicate Group Bus routing and
the bottom row indicates Main Bus routing.
Grp
Route
Main
Route
Grp
Section
A B C D E F G H J K P Q R S T U
BVU950
33 Rec
17 Rec
1 Rec Rec Rec Rec Rec
34 Rec
18 Rec
2
35 Rec
19 Rec
3
36 Rec
20 Rec
4
37 Rec
21 Rec
5
38 Rec
22 Rec
6 Rec
39 Rec
23 Rec
7 Rec
40 Rec
24 Rec
8 Rec
41 Rec
25 Rec
9 Rec
42 Rec
26 Rec
10 Rec
43 Rec
27 Rec
11 Rec
44 Rec
28 Rec
12 Rec
45 Rec
29 Rec
13 Rec
46 Rec
30 Rec
14 Rec
47 Rec
31 Rec
15 Rec
48 Rec
32 Rec
16 Rec
Repro
All
Input
All
Safe
Record
GRP Buses
Pan to:
MAIN Buses Route
Reverse Record
Machine
Track
Arming