Euphonix System Digital Audio Mixing System 5B - Manual (Page 58)

System 5-B Digital Audio Mixing System Operation Manual CM401 Master Section
58
Sum or Intercancel
The Σ key is inactive (not lit) by default, which means that selecting a new source
automatically cancels the previous one. When the Σ key is lit, multiple sources can be se-
lected simultaneously. The Σ symbol appears to the left of the first source selected in the
LCD display in the monitor controls. After selecting multiple sources, pressing the Σ
key again (so it is not lit) does not deselect theses sources until a new source is explicitly
selected.
Follow Control Room Monitors
Activate the FlwCR key so the Mon A–D outputs follow the source selected for the
Control Room monitors.
5.1.2 Main Section and Aux Send Format
Each Main section also has a return that allows Bus/Tape monitoring. The returns can
be patched from the record machine’s outputs using PatchNet (see Main Bus Send/Re-
turn on page 46). It is not possible to select a Main section and its return at the same
time; they intercancel even in Summing mode.
Aux Sends appear in the Panel as mono or stereo pairs.
5.1.3 Control Room Monitor Controls
Press the CR Output key above the CR Source LCD to display the Control Room Out-
put Panel (Figure 5-4).