Euphonix System Digital Audio Mixing System 5B - Manual (Page 71)

System 5-B Digital Audio Mixing System Operation Manual CM401 Master Section
71
Figure 5-11 Meter Presets and Meter Configuration Panels
Meter Configuration
Press the Cnfg key at the bottom of the Meter Presets Panel. The Meter Configuration
Panel appears (right of Figure 5-11). By default, the Full key (bottom-left) is lit, which
selects one large meter; the Channel key (top-left) is also lit, which displays the Chan-
nel options along the right side of the Panel. The double arrows (depicted opposite
Channel in Figure 5-11) show what the right-side options pertain to (i.e., press
Group to display Grp 1, Grp 2, etc. along the right side and the arrows appear opposite
Group).
Each Strip can have a different meter configuration but it is also easy to assign the same
configuration to consecutive Strips (with automatic incrementing).
Main
Panel
Channel < >
Info
Meter Configuration
Group
Mix
Aux
None
Full Dual
Fader
Main
Swap
Ch 1
Ch 2
Ch 3
Ch 4
Ch 5
Ch 6
Ch 7
Ch 8
Ch 9
Upr Lwr Pset
Single, large
meter Select
upper dual
meter Two, small
meters Select
lower dual
meter Back to Meter
Presets Panel
Page
< >
Main
Panel
Faders
Info
Meter Presets
Group Bus
Mix Bus
M4
M5
M6
M7
Sto Clr
M8
M9
M10
M11
M12
M13
M14
M15
M16
M17
M18
M19
M20
M21
M22
M23
M24
Name Cnfg Peak Avg
Named
Presets
Un-named
Presets
Store current
meter settings
to a Preset Name
a Preset Delete
a Preset Configure
meters Toggle, Peak, or Average
for all meters