Euphonix System Digital Audio Mixing System 5B - Manual (Page 67)

System 5-B Digital Audio Mixing System Operation Manual CM401 Master Section
67
5.3 Solo
System 5-B has an extensive solo control system that is accessed from the center sec-
tion. Press the Solo Ctrl switch in the master Solo section to display the Solo Control
Panel.
Figure 5-9 Master Solo section (top-left) and Solo Control Panel
5.3.1 Solo Mode
The three Solo modes can be selected by pressing their respective switches in the Solo
Control Panel. Selecting one mode deselects the previous mode.
APL (After-Pan Listen): Signal is post-fader and pan (stereo)
PFL (Pre-Fader Listen): Signal is pre-fader in mono
SIP (Solo-In-Place): Allows soloed channels through to the main busses. Mutes all chan-
nels not soloed but not channels designated as Solo-Safe (page 69). This mode allows
monitoring soloed channels with panning and effects if the effects returns have been
designated Solo-Safe. We do not recommend this destructive solo mode for live broad-
cast or for recording a mix or dub.
L4
L3
L2
L1
T1
LR phase
T2
CR
Output
Comms
Ctrl
Solo
Ctrl
Solo
Main
Panel
Info
Solo
New Clr Name
Momentary
Summing
I/C
APL
PFL
SIP
Mod
Clear
Backstop PFL
Solo-Safe
DimCR
Solo>None
Solo>Alt1
Solo>Alt2
Solo>Flw