Emerson 90 SERIES 1F95-391 - Manual (Page 15)

13
9. If you program Monday the first
time you press PROGRAM
VIEW it
will be copied to the rest of the week.
To program the other days of the week
press
ADV. DAY to until you reach the
day you wish to change and follow
Steps 10, 11 & 12. You can also copy
the program from one day to another.
To copy, press
HOLD /COPY. The
display will show COPY, and all the
other days of week will be flashing.
Press
HOLD /COPY again to copy the
day in to the rest of the week or press
TIME
FWD or TIME BACK until you
reach the day you want to copy to and
press
HOLD /COPY.
10.Press TIME FWD or TIME BACK
to set the time on the display as
selected in your HEATING or
COOLING SCHEDULE. Be sure to
check the AM or PM on the display.
11. Press the or button to
adjust the temperature to match your
schedule. If you want the fan ON
continuously during this period, press
the
FAN button.
12.Press PROGRAM VIEW one time.
MOR on the display will change to
DAY. Repeat steps 10 and 11 to enter
time and temperature for this period.
13.Press PROGRAM VIEW to
continue through the entire schedule,
entering time and temperature for each
period. When you are satisfied that
your program matches your schedule,
press PROGRAM
RUN . Program-
ming is now complete for this mode
and your program is running.
14.To program the other mode, repeat
the procedure from step 6.
Programming