Emerson 90 SERIES 1F95-391 - Manual (Page 31)

29
1F95-391
Contact a Local Heating & Cooling service person or visit our website at
www.white-rodgers.com to consult our “Where to Buy” Service/Dealer locator.
This feature displays the words CHCK PAD (check humidifier) after a set time of humidifier
operation. This is a reminder to maintain or clean your humidifier. When CHCK PAD is
displayed, you can clear it by pressing the SERVICE button.
HUMD MX indicates the humidifier has not reached the current humidity setting in the last
10 heating cycles. If the condition persists, a service person may recommend additional
humidifier capacity.
In cooling, as the room temperature falls you will eventually reach the setpoint temperature.
The system will continue to run until it reaches the low side of the temperature setting. As
an example: If set to 78 degrees with the room temperature falling the thermostat will
continue to call for cool as the temperature decreases in the following manner. 78.9, 78.8,
78.7, 78.6, 78.5, 78.4, 78.3, 78.2, at approximately 78.2 the thermostat will quit calling for
cool. This is why it is not unusual for the room temperature and set temperature to read the
same but the system continues to run. The amount of time it takes for the system to shut off
FAQs
10. What do I do if my
system is not working
properly and I need service?
11. What does CHCK PAD
on the display mean and
how do I reset it?
12.When I push the
Humidity button, the
display shows HUMD MX.
What does this mean?
13.Why does the system run
with the setpoint and room
temperature the same?
FAQs