Emerson 90 SERIES 1F95-391 - Manual (Page 4)

2
LARGE LIGHTED (LCD) DISPLAY
The thermostat display alternately
shows the current time and the current
temperature on the left side. The
display also shows the temperature
you have programmed or set on the
right side of your screen.
1 Display system mode (OFF,
AUTO, HOLD, VACA or HUMD).
During programming displays the time
period (MOR, DAY, EVE, NHT)
being programmed. In the configura-
tion menu, the menu item name is
shown, one word at a time (PRGM
MODE, EMR, COOL FAN DELA
OFF, etc.).
2 CHECK STAT appears when the
thermostat detects certain problems
within itself. CHECK SYSTEM
appears when the themostat detects
certain problems in the heating/cooling
or humidity system.
3 Indicates the length of time
remaining in a temporary hold
condition. Also indicates the length of
time remaining in VACATION mode.
4 Displays FAN ON when the fan is
operating continuously. Displays FAN
AUTO when the fan cycles with the
heating or cooling system.
5 Displays the setpoint temperature.
In HUMD mode, shows humidity
setpoint.
6 Alternately displays room
temperature and time of day. In
HUMD mode, shows actual humidity.
7 Shows the current day of the week.
When programming, shows the day(s)
being programmed.
8 The word HEAT or COOL will
appear above or below the setpoint if
area
1 is needed to display other
information.
FAN AUTO HRS
CHECK BATTERY
F
AM
MON
FAN AUTO
HEAT HEAT
HRS
CHECK BATTERY
F
AM
MON WED THU FRI SAT SUN TUE WED THU FRI SAT SUN TUE
1 1 2 3 4
5
8
6 7